Language
1L Winter Diesel Fuel Additive Heating Oil MANNOL 9983 Flow Fit Additive
Technical data and description:
Product properties:
Prevents crystallisation of the paraffin contained in diesel fuel at low temperatures.
Reduces the maximum filterability temperature (down to -36 °C) and the solidification temperature (down to -47 °C) of diesel fuel.
Optimises and stabilises the operation of the fuel system at low temperatures, prevents clogging of filters and fuel lines with paraffin crystals.
Increases the completeness of fuel combustion and burns completely by itself, without forming carbon deposits and ash residues.
Makes it easier to start engines at low temperatures.
Contains cleaning agents that ensure the cleanliness of assemblies and fuel system parts.
Protects the fuel system from corrosion.
Neutralises water condensate in the fuel tank and thus prevents the formation of ice jams in the drive system at negative ambient temperatures.
Manufacturer number: 9983-025.
Manufacturer: MANNOL.
Shelf life: 5 years from production date.
Manufactured: in Europe.
Delivery quantity: 750 ml.
Recommended for regular use.
Delivery content: 3 pieces 250 ml will be delivered as shown on the product picture.
Application: Shake thoroughly before use. Add to the diesel fuel or directly into the fuel tank before each refuelling or immediately afterwards, starting in autumn, in a ratio of 1:1000 (250 ml anti-gel to 250 litres of fuel). Self-mixing.
Caution! Note: The additive freezes at low temperatures and only develops its full properties when mixed with diesel fuel. Due to the risk of freezing, the additive must not be stored at temperatures below 0 °C. When exposed to cold, it becomes solid and does not flow. In this case, it must be warmed to room temperature before it can be used again. The additive can only be added to the fuel in a liquid state.
Product safety
Danger
You purchase your selected item via instant buy.
Payment by. Including deposit...
Shipping occurs after payment is received!
You send back your used part.
After receiving the used part, we will refund the deposit.
Purchase a deposit item from us, such as an injection nozzle.
First, pay the purchase amount. You can then transfer the deposit amount to the bank. We will provide you with the bank details.
You will receive a return slip with your order delivery. Return address and all details will be shown.
Send your old part back to us with the completed return form and sufficient postage. Shipping costs must be covered by the customer. Old parts must be returned within 15 days of order receipt.
After receiving your old part, you will typically receive your deposit refund within 4-5 working days. We cannot accommodate installation/expansion and additional costs.
In sales contracts between entrepreneurs, the seller assumes no guarantee, assurance, quality agreement, or other liability for the purchased item unless expressly agreed otherwise in this contract.
This exclusion of liability does not apply to claims for damages - regardless of the legal basis - if the seller acts intentionally or fraudulently.
Kaution wird nach Empfang des Altteiles zurückerstattet.
Altteile müssen vollständig, ohne äußere Beschädigungen und in einem
wiederverwertbaren Zustand zu uns geschickt werden.
Security deposit will be refunded upon receipt of the old part.
All parts must be returned to us without damage and in a recyclable condition.
Le dépôt est retourné après la réception des Altteiles.
Vieilles pièces doivent être complètes, être envoyés sans dommages
extérieurs et dans un état recyclable pour nous.
Il deposito verrà rimborsato al ricevimento della parte vecchia.
Le parti vecchie devono essere complete, senza danni esterni e in uno
essere inviato a noi in una condizione riutilizzabile.
El depósito se reembolsará al recibir la pieza antigua.
Las piezas antiguas deben estar completas, sin daños externos y en una
se nos enviará en condiciones reutilizables.